Audio Video Switchers
COMCON:
Audio Video Switcher 10x1
Input
10
Output
1
Description
- The AVS 10x1 is a broadcast grade audio follow Video Switcher. 10 video inputs are connected on MNC connectors with Lopthrough facility. Audio is balanced on XLR connectors. There are two outputs each for video and audio.
- Solid state switches for signal switching.
- None volatile Memory for the switch selection.
- Microcontroller based switching logic with Remote control options.
- Regulated power supply with redundant option
- Looping video inputs and bridging audio
- Self illuminated Hi-Reliability switches
Download
PDF
COMCON:
Audio Video Switcher 10x2
Input
10
Output
2
Description
- AVS-10x2 is well adopted to tough conditions. It is an efficient video/ audio signal switching equipment with low k factor,
- Excellent Frequency Response
- Electronics Switching In Vertical Interval
- Very Low Noise and Very Low Distortion
- Balanced XLR and RCA Connectors
- Fully Solid State and Flawless Performance
- Wide Dynamic Range
Download
PDF
COMCON:
Audio Video Switcher 10X1s
Input
10
Output
1 stereo
Description
- AVS 10x1S is an efficient video/audio signal switching equipment with low k factor, excellent frequency response and signal to noise ratio
- Electronics Switching (Vertical Interval Option)
- Very Low Distortion and excellent Frequency Response
- XLR or RCA Connectors (option)
- Remote Control (Optional)
- Fully Solid State and Flawless Performance
- Wide Dynamic Range
Download
PDF
COMCON :
Audio Video Switcher 10x2s
Input
10
Output
2 stereo
Description
- Microcontroller based switching logic with Remote control options.
- Regulated power supply with redundant option
- None volatile Memory for the switch selection.
- Self illuminated Hi-Reliability switches
- Solid state switches for signal switching.
Download
PDF
Description
- The RB-OA3 is a 1U rack-mount, unity gain on-air switcher, capable of switching three stereo pairs between three studios. Each studio can control the transmission path together with two peripheral paths for equipment such as a codec or hybrid and there is also a “Last studio to offer” bus, allowing for seamless and continuous broadcast from any multi-studio radio network. A “sustain” mode allows for a sustaining system, such as a PC automation system, to control the broadcast. Multiple RB-OA3 units can be connected together to switch more studios or more stereo pairs
- For more details click here
Download
PDF
Description
- The RB-OA3 has been designed for installation in a central technical area with cabling to custom panels, or selection switches, in each studio. If you don’t have any custom switch panels available, you can use an RB-OA3R in each studio. The RB-OA3R is a 1U rack mount switch unit for use in each studio that needs to be connected to the STUDIO 1-3 CONTROL connectors on an RB-OA3. It takes it’s power from the RB-OA3 unit so needs no power supply itself.
- For more details click here
Download
PDF
Description
- The RB-SS10 10 way stereo analogue source selector/mixer is a 1U rack-mount unit that produces a stereo analogue audio output from 10 selectable stereo analogue sources. There are 10 illuminated front panel push-buttons, which select and indicate the current channel selection. The selection and indication is also available through a remote connector on the rear panel. To stop accidental front panel selection there is a remote input to inhibit the front panel buttons.
- For more details click here
Download
PDF
Description
- The RB-DSS10 digital source selector is a 1U rack-mount which produces an AES/EBU and S/PDIF level digital audio output from 10 selectable AES/EBU or S/PDIF digital input signals. There are 10 illuminated front panel push-buttons, which select and indicate the current channel selection. The selection and indication is also available through a remote connector on the rear panel. To stop accidental front panel selection there is a remote input to inhibit the front panel buttons.
- For more details click here
Download
PDF
Home 
About us
Product
Solutions
Career
Principals
Contact Us